Instant Boiling Water Tap Systems

Long gone are the days when instant boiling water was a luxury only commercial kitchens and large commercial tea rooms could afford. Instant boiling water is fast becoming a must-have in homes and small offices, too.

The different types of boiling water systems include:

• Wall-mounted boiling systems
• Hot and Cold water coolers
• Undersink boiling only filtered water taps
• Undersink boiling & ambient filtered water taps
• Undersink boiling & chilled filtered water taps
• Undersink boiling, chilled & sparkling filtered water taps‍
• Undersink all-in-one filtered water taps

The smallest wall-mounted boiler is the Zip Econoboil 3-litre unit. The largest we offer is the Hydromix 60 litre. There are many capacity sizes in between from brands such as Billi, Zip, and Hydromix, so there is sure to be an on-wall boiler in the capacity you need.

No. All of our boiling and hot water systems are simply connected to your cold mains water line. No hot water supply is required for any of our instant boiling water systems.

Depending on the model, our hot water taps deliver water between 88 and 98 degrees Celsius. Many of the models we stock have temperature controls so you can control your water to the exact degree you need.

All of our on-wall boilers can have additional external filters, but not all come with them as standard.

It’s a good idea to add water filters to your on-wall boiling water system. They provide you with clean and healthy water, protect the internal tank and water lines from residue buildup, and potentially prolong the life of your boiling water appliance.

Both the Zip and Billi systems offer an integrated or external (depending on the model) sub-micron filter that reduces sediment, chlorine, heavy metals, and water cysts.

If you require a stronger filtration system, such as a filter system for freshwater or for removing fluoride from mains water, then we would recommend either the Aquakleen Bacteria Twin or the Aquakleen Fluoride Twin. These filters can be added to either system as a pre-filter, giving you the superior filtration you need.

Both the Zip and Billi under sink boiling water taps offer an integrated safety feature that allows you to set your system to 'boiling safety mode'. This means that you will need to activate the safety switch and the boiling leaver at the same time to dispense boiling water. It remains a feature of your system and can be either enabled or disabled at any time.

The advantage of choosing a Zip or Billi instant boiling water tap is that they both have advanced technology to save energy when not in use. The Zip HydroTaps come with a sensor-activated 'sleep when it’s dark' feature and the Billi Eco and Quadra taps come with a 2-hour standby mode that powers down the system when not in use.

If you just want a simple and cost-effective boiling water tap without the expensive bells and whistles, look at our Hydromix Boiling Only and Hydromix Boiling & Chilled systems. They are available in three boiling capacities and operate from mains water pressure without expensive valves, pumps, and technology. These simple, Australian-made boiling water taps are exceptional in both low-maintenance functionality and stylish design.

Yes. We have many years of experience and specialty tools that allow us to easily drill through granite and stone benchtops. This is common practice for most modern kitchens these days.

However, if your benchtop is marble or concrete, we recommend you commission an experienced stone mason to conduct this work for you. We can provide you with the hole size and tap specifications of your choice if and when you need.

Chances are your filters have not been replaced for some time. There has probably been a build-up of deposits and residue inside the internal boiler tank. Contact our service team and we can clean out your tank and install a filter system to your boiler for you.